Easyseal Back to black 1ltr

Easyseal Back to black 1ltr

EASYSeal Back to Black Limestone is a penetrating resin that transforms & exaggerates the look of Black Limestone, while providing a stain & water resistant surface. This product packs a big punch and a little goes a long way – a 1 litre bottle covers up to 40m² subject to porosity of the stone.

Revive faded Black Limestone
Stain Resistant
Water Repellent
Uniform colour enhancement
Overcoatable

Ensure paving is dry for at least 48 hours before application. Do not use if rain is possible during this time.

Use neat as supplied.
Shake well before use.
Apply an even coat with a paint pad to one paver at a time, finishing the application on the joint. A little goes a long way.
Dry any excess from the surface using a lint free cloth. Buff to remove all shine. Failure to do so may result in longer drying times and a slippery surface when wet.
Once an application has been applied do not walk or drive on the coated area for at least 24 hours after application.
Allow product to cure for 24hrs before subjecting to heavy use - increase this time in cold, damp conditions.
NOTE: Coverage depends on the porosity of the surface and its texture. If the surface is particularly uneven or particularly porous, more liquid will be used.